파일:DFT approximation to Hilbert filter.png
둘러보기로 이동
검색으로 이동
최대 해상도입니다.
DFT_approximation_to_Hilbert_filter.png (665 × 523 픽셀, 파일 크기: 24 KB, MIME 종류: image/png)
파일 설명
| 설명 | The green graph is a section of the infinitely long Hilbert transform filter impulse response. The blue graph is a shorter section, produced by the Scilab function hilb() for use as an FIR filter. hilb() apparently just applies a simple rect() window, but other windows are also possible. When the filtering (convolution) is performed by multiplication of DFTs in the frequency domain (circular convolution), people sometimes replace the DFT of hilb() with samples of the DTFT (discrete-time Fourier transform) of h[n] = 2/(πn), whose real and imaginary components are all just 0 or ±1, thereby avoiding actual multiplications. But in that case, the convolution is actually being done with the periodic summation of h[n], shown in red. Unlike hilb(), it never goes to zero, which means that the "edge effects" of circular convolution affect (distort) every output sample. They can't simply be eliminated by discarding a few corrupted samples. That effect is generally worse than the distortion caused by windowing the h[n] sequence, even with the crude rectangular window. (example) | ||
| 날짜 | |||
| 출처 | 자작 | ||
| 저자 | Bob K | ||
| 저작권 (이 파일을 인용하기) |
|
||
| PNG 발전 | |||
| Scripts | Do it in two languages (for fun).
ScilabN = 512; % DFT size
L = N/2; % length of plots
odd = 1:2:L;
// Create a segment of the IIR filter and its periodic summation
h_IIR = zeros(1,L);
h_periodic = zeros(1,L);
for n = odd
h_IIR(n) = 2/(%pi*n);
h_periodic(n) = 2/(N*tan(%pi*n/N)); % periodic summation
end
// Equivalent method
// M = 2*L+1;
// h_IIR = hilb(M); //513-tap, FIR Hilbert transform filter
// h_IIR = h_IIR(L+2:M);
// Create a 65-tap, FIR Hilbert transform filter
minimum_display_value = 0.0001;
M = 65;
M2 = (M-1)/2;
// The next 2 statements are equivalent to the one commented out below them
h_65 = hilb(M);
h_65 = [h_65(M2+2:M) ones(1,L-M2)*minimum_display_value]; // align with h_IIR
//h_65 = [h_IIR(1:M2) ones(1,L-M2)*minimum_display_value]; // align with h_IIR
// Create another filter (equivalent to h_periodic) by sampling the DTFT
H_DFT = %i*[0 -ones(1,L-1) ones(1,L)];
h_DFT = real(fft(H_DFT, 1)); // inverse FFT
h_DFT = h_DFT(2:$); // align with h_IIR
// Display the results
r=5; g=3; b=2; // based on a call to getcolor()
plot2d(odd', [h_IIR(odd)' h_DFT(odd)' h_65(odd)'], logflag="nl", style=[g r b],..
rect=[0,minimum_display_value,256,1], frameflag=1, axesflag=1);
title("Hilbert filter (green) and two approximations", "fontsize", 4);
ylabel("impulse response (for n > 0)", "fontsize", 3);
xlabel("n (odd values only)", "fontsize", 3);
a = gca();
//a.box = "on"; included in frameflag=1
a.font_size=3; //set the tics label font size
a.x_ticks = tlist(["ticks", "locations", "labels"], [1 51 101 151 201 251],..
["1" "51" "101" "151" "201" "251"]);
// Set line thickness of plots
a.children.children.thickness=3;
// This works too
//f = gcf();
//f.children.children.children.thickness=3;
// Can do it this way when the thicknesses are not all the same:
// pb = a.children.children(1); // Note that the order (compared to "style") is LIFO
// pr = a.children.children(2);
// pg = a.children.children(3);
// pg.thickness = 3;
// pr.thickness = 3; // equivalent to set(pr,'thickness',3);
// pb.thickness = 3;
Octavepkg load signal
N = 512; % DFT size
L = N/2; % length of plots
odd = 1:2:L;
% Create a segment of the IIR filter and its periodic summation
h_IIR = zeros(1,L);
h_periodic = zeros(1,L);
for n = odd
h_IIR(n) = 2/(pi*n);
h_periodic(n) = 2/(N*tan(pi*n/N)); % periodic summation
endfor
% Create a 65-tap, FIR Hilbert transform filter
minimum_display_value = 0.0001;
M = 65;
M2 = (M-1)/2;
h_65 = [h_IIR(1:M2) ones(1,L-M2)*minimum_display_value]; % align with h_IIR
% Create another filter (equivalent to h_periodic) by sampling the DTFT
H_DFT = i*[0 -ones(1,L-1) ones(1,L)];
h_DFT = real(ifft(H_DFT)); % inverse FFT
h_DFT = h_DFT(2:end); % align with h_IIR
% Display the results
figure
semilogy(odd', h_IIR(odd)', 'color', 'green', 'linewidth', 2)
hold on
% The next two statements are eqivalent
semilogy(odd', h_DFT(odd)', 'color', 'red', 'linewidth', 2)
% semilogy(odd', h_periodic(odd)', 'color', 'red', 'linewidth', 2)
semilogy(odd', h_65(odd)', 'color', 'blue', 'linewidth', 2)
xlim([0 256])
ylim([minimum_display_value 1])
set(gca, 'xtick', [1:50:251]);
title("Hilbert filter (green) and two approximations", "fontsize", 14);
ylabel("impulse response (for n > 0)", "fontsize", 12);
xlabel("n (odd values only)", "fontsize", 12);
|
LaTex
![{\displaystyle \color {OliveGreen}{\boldsymbol {h[n]={\frac {2}{\pi n}}}}}](https://wikimedia.org/api/rest_v1/media/math/render/svg/1e0bb8295e56a0e53e40d4f6c72ff69e4f32dc3d)
![{\displaystyle \color {Red}{\boldsymbol {\sum _{m=-\infty }^{\infty }h[n-m\cdot 512]}}}](https://wikimedia.org/api/rest_v1/media/math/render/svg/2c57b44917a7cee58316c1c542f9375d104f09e2)
La bildo estas kopiita de wikipedia:en. La originala priskribo estas (The image is copied from wikipedia: en. The original description is):
| date/time | username | edit summary | source |
|---|---|---|---|
| 23:55, 7 December 2005 | en:User:Bob K | (I created this image myself, using Matlab tools.) | http://en.wikipedia.org/wiki/Image:DFT_approximation_to_Hilbert_filter.png |
en:Image:DFT approximation to Hilbert filter.png
파일 역사
날짜/시간 링크를 클릭하면 해당 시간의 파일을 볼 수 있습니다.
| 날짜/시간 | 섬네일 | 크기 | 사용자 | 설명 | |
|---|---|---|---|---|---|
| 현재 | 2015년 3월 28일 (토) 21:52 | | 665 × 523 (24 KB) | wikimediacommons>Bob K | This one depicts the truncated part of the FIR filter as on the x-axis, which is slightly above zero. The actual value of the truncated part is exactly zero., of course. |
이 파일을 사용하는 문서
다음 문서 1개가 이 파일을 사용하고 있습니다:
